These “get you started” tutorials cover the latest key features in DesignBuilder, and are produced in short sessions so that you can quickly and easily dip into specific topics of interest. They provide a valuable resource for existing DesignBuilder users to refresh their knowledge on areas of the software they may not have used for a while. Also, for those new to DesignBuilder, the tutorials will provide a nice logical way to learn the software basics. Please note that although the tutorials use SI units you can easily change to IP units in Program Options. You must be logged in to view these tutorials, if you do not have a username and password, please click here to register.

You may find it helpful to cross-reference the tutorial you view with the content in the Program Help. People generally learn most effectively by "doing" rather than "watching", so please do try out the techniques shown in the tutorials while they are fresh in your mind before moving on to the next tutorial. And above all, we hope you find the tutorials useful and fun!

Important Note: UK and Ireland Energy Assessors should view the tutorials at the bottom of this page, which are specific to DesignBuilder’s Certification interface. The tutorials above that are predominantly based on the EnergyPlus interface, which is different to the interface used for SBEM and DSM modelling.

Introductory Tutorials

Basic Geometry

These tutorials cover the key areas needed to get started, including how to quickly create and edit building geometry, automated adjacency assignment, importing/exporting models from/to other tools, and creating thermal zones using partitions.

Basic Model Data

The Basic Model Data tutorials show how to set up data on the Activity, Constructions, Openings, Lighting and HVAC model data tabs for EnergyPlus simulations.

Heating Design, Cooling Design and Simulation

The Calculations tutorials explain how to set up DesignBuilder EnergyPlus simulations and analyse results.

Detailed HVAC

The Detailed HVAC tutorials show how to model different systems and components to serve a whole building or parts of it. The tutorials will show you how to quickly and easily create and edit EnergyPlus Detailed HVAC systems (including pre-configured templates for ASHRAE 90.1), and also how to create systems from scratch.

Natural Ventilation

These tutorials explain how to configure a DesignBuilder EnergyPlus model for scheduled and calculated natural ventilation and mixed-mode systems, then set up simulations and analyse results.

Daylighting (Radiance)

This tutorial explains how to set up and run DesignBuilder Radiance daylighting point-in-time and annual climate-based simulations and analyse results.

UK/Ireland SBEM, DSM, and Summer Overheating

The Certification foundation tutorial will show you how to use DesignBuilder’s SBEM UK and Ireland Certification interface to create or import model geometry, add model data, run a calculation, and review the SBEM Certification output documents. DesignBuilder’s SBEM and DSM interfaces are largely identical, so the DSM tutorial will highlight the main differences and additional functionality in the DSM interface to enable more accurate modelling of solar gain and shading etc. The summer overheating tutorial will show how quickly you can input key model data, run simulations, and generate outputs for CIBSE TM52 and TM59 assessments. 

Note that you can switch seamlessly between DesignBuilder’s interfaces for SBEM, DSM, and summer overheating calculations. That process is illustrated in our “Generating TM52/59 Reports From Your EPC Model in Record Time” webinar on this page:

We will be progressively releasing new tutorials in the months ahead. The new tutorials will be added to the list above and will ultimately replace the legacy tutorials below.

The legacy tutorials below are not up to date and miss some important functionality. In general we advise not using the legacy tutorials, but you may still find them useful as an introduction if a newer tutorial on that topic is not available above. If the content you need is not yet available in a new tutorial, we highly recommend you read the relevant program help topic. Also, our new on-demand online training is based on the latest software and provides step by step guidance on the fundamentals of modelling in DesignBuilder. You can find more information on this training content here.


Other Video Learning Resources

Subscribe to the DesignBuilder Newsletter

Get the latest news on DesignBuilder products, updates, webinars and training.

Contact Us

  • DesignBuilder Software Ltd
    Stroud House
    Russell Street
    Stroud, Gloucs
    GL5 3AN
  • +44 (0) 1453 755500